Made in China Cleaner equipment high pressure cleaner Pipeline Pigs

There are three reasons for the tube clogging:

First, the pipeline is deformed seriously so that the pig can not pass;

Second, the pipeline low-lying dirt and a large amount of dirt be removed too much to cause the front of the pig clogging;

Third, in the process of the large foreign body or perforation punch card hard there is objects penetrate the tube.

The solution is as follows:

1.

Pipeline deformation. Refers to the pipeline or elbow due to stress or external caused by deformation more than 15%. Solution: soft cleaning pig itself deformation of 45%, as long as the pipeline deformation does not exceed 40%, is not the phenomenon of clogging. If the card plug, in 2 to 3 hours to find the clogging position quickly, with pressure hole to remove the pig, replace the deformation pipeline to continue  clear.

2.

Pipeline waxing dirt deposition. The front of the pig deposition is too long, the solution: strict control of the number of dirt. The use of soft pig diameter from small to large, step by step method, so that each time the tube with a moderate amount of grease to improve the capacity of the pig, to prevent the pig clogging, such as excessive deposition cause increased pressure,hole with pressure for partial exclusion (in the tube before 300m,the opening or pre-cut in the pipeline at the opening point, hole size Φ90 ~ Φ100).

3.

If the foreign body plug, in 2 to 3 hours to find the clogging position quickly, with pressure block off, take out the pig, remove the foreign body to continue to clear.