400 Alloy Coil, ASTM B127 Monel Strips, 400 Monel Cold Rolled Sheets, ASME SB127 Monel Sheet & Plate, UNS N04400 Strip, Nickel Monel 400 Sheet.

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. Monel 400 Plate exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. 400 Alloy Coil is particularly resistant to hydrochloric and hydrofluoric acids when ASTM B127 Monel Strips are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 Plate has excellent corrosion resistance in a wide variety of media. 400 Monel Cold Rolled Sheet is characterized by good general corrosion resistance, good weldability and moderate to high strength. ASME SB127 Monel Sheet has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

Monel 400 Sheet & Plates Equivalent Grades:

Chemical Composition of Monel Alloy 400 Sheet & Plate:

Mechanical Properties

Typical room temperature Tensile Properties of Annealed Material